2
IMPORTANT NOTE:
It is vitally important that when fixing the Wash
Trough to a solid wall, substantial fixings (such as
the Fischer TA M6 S/10) are used in the two key-
hole anchor points. Failure to do so could result
in the Wash Trough falling from the wall.
The bolts used in the keyholes can be adjusted
after the trough has been hung, this can help
reduce the gap to wall. This can be done via cut
outs in the plywood sub frame.
Bolt under head distance to wall needs to be sufficient to accommodate thickness of trough
material. Ensure fixing points are level and bolts are fully anchored into wall.
Z
Z
5
Remove front access panel.
6
Mount Trough, ensuing fixations are fully located in keyholes and wall fit is acceptable,
check heights/levels.
