manualshive.com logo in svg

Armitage Shanks A7001AA/GN, Installation Instructions Manual

Share
Download
Armitage Shanks A7001AA/GN Installation Instructions Manual Download Page 2

2

TABLE OF CONTENT

1  IMPORTANT PRE-INSTALLATION NOTES ................................... 4
2  PRODUCT BOX CONTENTS  ......................................................... 5
3  SUPPLY CONDITIONS .................................................................... 6

3.1  WATER REGULATIONS .....................................................................................6
3.2  CATEGORIES OF RISK .....................................................................................6

4  URINAL PLUMBING ARRANGEMENTS ........................................ 6
5  INSTALLATION GUIDE .................................................................... 9

5.1  MOUNTING SENSORS ......................................................................................9
5.2  PLUMBING OVERVIEW ...................................................................................10
5.3  ELECTRICAL CONNECTION ..........................................................................13

6  URINAL OPERATION .................................................................... 18
7  SENSOR RANGING & RUN TIME ADJUSTMENT  ..................... 19
8  EXTENSION CABLES ................................................................... 20
9 MAINTENANCE ..............................................................................20

9.1  SOLENOID VALVE ............................................................................................20
9.2  HYGIENE FLUSH (AUTOMATIC) ....................................................................21

10  CLEANING CHROME SURFACES ............................................... 22
11  SPARE PARTS ...............................................................................23

Sensorflow 21 compact high pressure

mains water urinal flushing device

These compact panel (PM) Sensorflow 21 electronic urinal flushing products is designed for water 

economy & hygienic “no-touch” operation.

The urinal flush is operated by the infrared sensor which detects the presence of the user in the sensing re

-

gion. When the user moves away, the flush is triggered automatically. Water will flow for the preset run-time.

These products is intended to be supplied with cold water only.
The products is available in 2 versions: Mains powered (transformed) with option to link up to 5 link units 

A7001.. 

(PM) is supplied with

 mains power unit

A7002.. 

(PM) is supplied with

 link unit

One mains unit (A7001..) can power up to five link units (A7002..)

Abbreviations & terminology used

PSU:  P

ower 

S

upply 

U

nit, either mains, battery or link versions.

PCB:  P

rinted 

C

ircuit 

B

oard inside the PSU.

RCD:

 

R

esidual 

C

urrent 

D

evice

SELV: S

afety 

E

xtra 

L

ow 

V

oltage

LINK

 PSUs: (up to 5 max) can be connected in series to a single mains PSU.

Permitting washroom with multiple products to be run from a single mains supply point.

PM:

 

P

anel 

M

ount

Summary of Contents for A7001AA/GN

























Reviews:

No comments

Brands by name

Popular brands

Load more brands