INSTALLATION GUIDE continued…
11
10
6
7
8
9
24
24 & 25
Refer to the diagram on the next page for PSU
connection options.
Power:
6W
Approval EU:
EN 60950, EN 60335
Approval UL:
UL 1310
Input voltage:
100V - 240V~ 50 - 60Hz
Protection class:
II
DIN EN 60730-1: Type 1
Each type of PSU is
identified by this
coloured dot system:
RED
DOT
BLUE
DOT
GREEN
DOT
MAINS
LINK
BATTERY
12
red
black
Electrical information
& approvals:
9
5.3
Electrical connection
Connection of this product to mains
power supply should be undertaken by
a competent person and should conform to IEE
Wiring Regulations
Orientation & position of solenoids, and PSU
(
P
ower
S
upply
U
nit) case can differ from installa-
tion to installation.
With the product securely mounted to the basin &
plumbed-in, electrical work can commence.
12.
First connect the two solenoid valves together
using the separate SV link cable provided. The SV
link cable is black & red with connectors at both
ends.
SV link cable length is 500mm.
Note: one end of the SV link cable has additional spade
connectors for attaching the sensor cable.
Connect the cable to the solenoid valve terminals as
shown. Observe the + and – symbols marked on the
solenoid valves, connect the red cable to + & black to -.
Locate the end of the red & black cable which emerges
from the spout tail (attached to the rear of the sensor).
This cable length is nominal 800mm.
Connect this cable to the spade connectors shown on the
SV link cable. Observe the + and –. Ensure red is con-
nected to red & black to black.
