22
Operation
Operating the PC Software
Details about operating the optional software can be obtained by choosing the ‘Help’
tab in the top right hand corner of the screen as shown below:
Installing and using the S12-MKII-50 Data Logger
Function of the Data logger and software
When supplied, the S12-MKII data logger is located underneath the collecting tank at
discharge end of the sand tank. The data logger incorporates a USB connector at
one end for powering the water level and weight sensors and logging the measured
data via a PC.
A flexible tube connected from a pressure sensor inside the data logger, is connected
to the collecting tank via a Guest quick release connector to measure the water level
inside the collecting tank.
Installing the PC Software
Before operating S12-MKII-50 it will be necessary to install the software from the CD-
ROM supplied with S12-MKII-50 onto an appropriate PC (PC not supplied).
For instructions on how to install and run the software insert the CD-ROM into the
optical drive on the PC (PC not supplied) then choose ‘Help’ from the menu.
After installing and running the software on the PC, instructions on how to operate
the software can be obtained by choosing the ‘Help’ tab in the top right hand corner
of the screen as shown below:
Summary of Contents for S12-MKII
