G
G
PRODUCT ASSEMBLY INSTRUCTIONS
Item#: ASTORIA NIGHSTAND
Helpers needed to assemble: 1
Estimate time frame to assemble: 30 minutes
Tools Needed not Included: Phillips Screwdriver
#
Picture
Description
Quannity
A
Nighstand
1
B
Leg
4
C
Bolt - M8 x 40
8
D
Flat Washer Ø19 mm
8
E
Lock Washer Ø12 mm
8
F
Allen Wrench V4
1
G
Bolt - M4 x 40
4
H
Handdle
2
A
B
B
B
B
F
C
E
D
·
Step 1: Place the nightstand on its length side on the floor as seen. Make sure it's on a safe surface where the table cannot be scratched
and or damaged.
·
Step 2: Align the leg with the nightstand holes as seen.
·
Step 3: Identify the first leg and the bolt in using the Allen Key as follows (2 Bolt - M8 x 40mm; 2 flat washers; 2 lock washers) per leg.
·
Step 4: Using the Allen Key you will tighten the bolts until the leg is firmly attached.
i. Repeats Steps 2-4 for each leg.
·
Step 5: Proceed to flip the dresser back upright.
·
Step 6: Identify the handles that will be screwed into the drawers.
·
Step 7: Bolt in the handles using the Phillips Screwdriver as follows (2
Bolt - M4 x 40mm) per handle.
·
Step 8: Using the Phillips Screwdriver you will tighten the bolts until
the handle is firmly attached.
·
Step 9: Test the nightstand is firmly on the wall and
ground and the dresser does not wiggle.
·
Step 10: Enjoy your new nightstand.
H
