·
Step 16
: Now that we've connected the headboard
and footboard with the side rails, we will proceed to
reenforce.
·
Step 17:
Using the Allen Key you will screw in the
siderail from the inside and outside of the frame using
(2 Bolt - M6 x 90mm; 2 Lock Washer -
Ø
10mm; 2
Washer -
Ø
16mm) for each bracket. At the same time,
you need to place a (Insert Nut - M6 thread) on the
inside of the frame where the bolt will lock into. And
repeat for another side.
i. Repeat Step 16-17 for each bracket connecting
on the headboard and side rails frame.
·
Step 18
: Now that we've connected the headboard
and footboard and reinforced the frame, we will start
to insert the middle support bars.
·
Step 19:
Locate the middle supports bar and 2
middle legs as this will be assembled onto the
preassembled frame.
·
Step 20:
Using the Allen Key you will screw in the leg
down onto the middle support bar (Bolt - M8 x 40mm)
for each leg.
i. Repeat Steps 19-20 for each leg.
·
Step 20:
Once assembled, place the preassembled
middle support bar on the frame to set evenly equal
on both the headboard and footboard.
·
Step 21:
Locate the slats as they will be assembled
onto the preassembled frame.
·
Step 22:
Using a Phillips Screwdriver you will screw
down the slats down onto the side rails (Screw - M4
x 30mm) for every 4 slats.
·
Step 23:
Test that the bedframe is firmly on the
ground and the bedframe does not wiggle.
·
Step 24:
Enjoy your new bedframe.
D
H
H
N
M
D
Q
O
M
T
S
R
BACK
