Warning
Improper installation, service, maintenance, or
use can cause explosion, fire, electrical shock,
or other conditions, which may cause personal
injury or property damage and will void the
warranty.
Check with Armcor Air Solutions for any
information required on this equipment.
Danger
Electrical shock can cause personal injury or
death. Before performing any work on this
equipment, the electrical supply must be turned
off to avoid the possibility of shock, injury, or
damage to the equipment. There may be more
than one power supply circuit.
Installation by Authorised Personnel
•
Only trained and qualified personnel should install, repair or service heat
recovery and/or air handling equipment.
•
Installing and servicing equipment can be hazardous due to electrical and
mechanical components.
•
When working on equipment, observe precautions in all literature, tags
and labels attached to or shipped with the unit. Follow all safety codes
and guidelines. Wear work gloves, safety goggles and protective clothing.
•
All work must comply with relevant SAA wiring rules and local authority
codes. Installers must ensure that all statutory regulations and by laws
have been addressed.
•
Installers must ensure that the structures built to support
the equipment have been suitably constructed for the
purpose, all safety precautions have been applied prior to
installation, and all preparation work has been suitably
sized and installed for its purpose.
Safety
4 Armcor_XCM–Compact Multiflow ERV Installation and Operation Manual 2021
