www.
Armagard
.com
Page |
1
Toll Free (US):
1-866-434-0807
Call (UK):
0121-608-7210
1. The following manual details the information
and safety precautions needed for the safe
installation of the Armagard standard
controller board.
2. All power must be switched off until the
enclosure has been fully assembled and is
ready to use.
3. If your enclosure is for outdoor use, don’t
attempt installation in bad weather; use
correct lighting for optimum viewing
conditions.
4. Armagard recommends that the enclosure
should always be secured to the floor or wall
before adjusting the controller board.
READ THIS MANUAL THROUGH BEFORE INSTALLING YOUR UNITS TO ENSURE CORRECT
INSTALLATION AND THAT YOU’RE COVERED UNDER WARRANTY.
5. Because of its watertight seal, to lock an
enclosure you have to push firmly against
the door and then turn the key.
6. All images used in this manual are for
reference and example purposes only.
7. The final controller board you receive will
differ depending on what has been agreed
on the order with your account manager.
8. Software is compatible with Windows XP, 7,
8 & 10.
Setup Manual
YOUR WARRANTY AGREEMENT IS VOID
if you perform any modifications to the
controller board, for example, drilling or penetrating any additional holes into the board.
FOR BEST PRACTICE
mount the controller board cover using the recommended
procedure.
Controller Board Setup – Standard V2
