YOUR SOURCE OF ENERGY
|
14
MANUAL
| OFFICE SERIES
PL
EN
HU
RU
1.
I
mportant instructions for uninterrupted power supply (UPS) usage
1.1
Introduction
PLEASE SAVE THIS INSTRUCTION
–
The following information regarding the usage of ARMAC models: OFFICE
650E LCD, OFFICE 850E LCD, OFFICE 1000E LCD, OFFICE 1500E LCD, OFFICE 650F LCD OFFICE 850F LCD
OFFICE 1000F LCD OFFICE 1500F LCD contains instructions and rules that must be adhered to and complied
with during installation, use and maintenance of the device. Do not use this uninterrupted power supply
before an attentive reading and complying with all the information and safety instructions contained in the
m
anual. Hold on to the manual for later purposes
.
WARNING: UPS HAS A WARRANTY SEAL! REMOVING, BREAKING OR DAMAGING IT WIL
L RESULT IN A
LOSS OF WARRANTY!
1.2
Usage
•
This particular product has been specially designed to work with computers (PCs), laptops, monitor
s,
LED / LCD only.
•
This product is not intended to work with household appliances. It should not be used with devices
such as laser printers, scanners, hairdryers, refrigerators, microwave ovens, washing machines,
vacuum cleaners, fans, electric kettles, induction cookers, garage doors and entrance, electric shutters,
central heating ovens, pumps, heaters in terrariums and aquariums and other similar devices. Do not
connect the elements that might cause an overload of the UPS.
•
Due to the character of the UPS work (simulated shape of the sinusoidal wave while operating in a
battery mode), it is not suitable to work or should be used with any of the unmentioned devices that
possess electric motor or heater. Connecting any products mentioned above to the device
puts them
at risk of damage.
•
UPS system should not be used in any life support systems or other relevant devices critical to your
health
.
1.3
General safety precautions
•
The use of the device does not require any specialized training or electrical permits.
•
This UPS is designed to operate in a controlled environment (Controlled temperature and humidity,
the device should work indoors without any conductive contaminants [dust, flammable gases,
corrosive substances, etc]).
•
Connect all the wiring in accordance with effective local electrical regulations and in such way to
eliminate the risk of stepping or tripping over them.
•
Use only VDE and CE certified power cables when connecting the load(s) to the UPS.
•
Any installation or circuits in which UPS will be used should be made under local regulations relating
to electricity.
•
The power socket should be easily accessible and located near the device. Be sure to connect the UPS
to a grounded outlet.
•
To isolate the supply of emergency power system from the AC outlet, unplug it from the electrical
outlet.
•
Do not use UPS to work outside the rated values of the load.
•
Do not disassemble the case. Inside the device, there are no parts that can be repaired by the user.
Leave the maintenance to qualified personnel.
•
During the warranty period, it is prohibited for users to exchange UPS batteries.
•
Batteries should be replaced with ones of the same type and the same number of sealed electrolyte
chambers. Battery maintenance should be performed or supervised by qualified personnel with
appropriate knowledge while maintaining required precautions.
•
To ensure proper operation of the entire UPS system, including the device itself and batteries, along
with an increase in their lifetime, it is advised to charge the batteries (through the correct connection
