ARM Developer Suite Assembler Manual Download Page 146

Page: 146 / 360

ARM Instruction Reference

4-36

ARM DUI 0068B

4.3.6

TST and TEQ

Test and Test Equivalence.

Syntax

TST{

cond

}

Operand2

TEQ{

cond

}

Operand2

where:

cond

is an optional condition code (see

Conditional execution

on page 4-4).

is the ARM register holding the first operand.

Operand2

is a flexible second operand. See

Flexible second operand

on page 4-24

for details of the options.

Usage

These instructions test the value in a register against

Operand2

. They update the

condition flags on the result, but do not place the result in any register.

The

TST

instruction performs a bitwise AND operation on the value in

and the value

Operand2

. This is the same as a

ANDS

instruction, except that the result is discarded.

The

TEQ

instruction performs a bitwise Exclusive OR operation on the value in

and

the value of

Operand2

. This is the same as a

EORS

instruction, except that the result is

discarded.

Condition flags

These instructions:

•

update the N and Z flags according to the result

•

can update the C flag during the calculation of

Operand2

(see

Flexible second

operand

on page 4-24)

•

do not affect the V flag.

Use of r15

If you use r15 as

, the value used is the address of the instruction plus 8.

You cannot use r15 for any operand in any data processing instruction that has a
register-controlled shift (see

Flexible second operand

on page 4-24).

Summary of Contents for Developer Suite





























































































































































































































































































































































Search results

Summary of Contents for Developer Suite

Reviews:

Related manuals for Developer Suite

Brands by name

Popular brands

ARM Developer Suite, Assembler Manual

Search results

Summary of Contents for Developer Suite

Reviews:

Related manuals for Developer Suite

Brands by name

Popular brands