ARM Cortex A9 Technical Reference Manual Download Page 70

Page: 70 / 213

System Control

ARM DDI 0388I

4-21

ID073015

Non-Confidential

4.3.4

Revision ID register

The REVIDR characteristics are:

Purpose

Provides implementation-specific minor revision information that can
only be interpreted in conjunction with the MIDR.

Usage constraints

The REVIDR is:
•

a read-only register

•

common to the Secure and Non-secure states

•

only accessible in privileged modes.

Configurations

Available in all configurations.

Attributes

See the register summary in

Table 4-2 on page 4-5

Figure 4-4

shows the REVIDR bit assignments.

Figure 4-4 REVIDR bit assignments

Table 4-31

shows the REVIDR bit assignments.

To access the REVIDR, read the CP15 register with:

MRC p15, 0, <Rt>, c0, c0, 6; Read Revision ID Register

4.3.5

Cache Size Identification Register

The CCSIDR characteristics are:

Purpose

Provides information about the architecture of the caches selected by
CSSELR.

Usage constraints

The CCSIDR is:
•

only accessible in privileged modes

•

common to the Secure and Non-secure states.

Configurations

Available in all configurations.

Attributes

See the register summary in

Table 4-2 on page 4-5

Figure 4-5 on page 4-22

shows the CCSIDR bit assignments.

ID number

Table 4-31 REVIDR bit assignments

Bits

Name

Function

[31:0]

ID number

Implementation-specific revision information.
The reset value is determined by the specific Cortex-A9 implementation.

Summary of Contents for Cortex A9





















































































































































































































Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands

ARM Cortex A9, Technical Reference Manual

Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands