6
INTRODUCTION
Congratulations on your purchase of an Intrinsically Safe Ultra Precision SAW Scale. This Scale offers a combination of versatility,
accuracy and simplicity in an easy to use and easy to maintain package. Advanced menu driven operating software, large memory
capacity and an easy to use menu structure allows the scale to be configured for almost any application. To obtain the best
performance and greatest utilization from your scale, read this instruction booklet completely and carefully.
Please enter the Serial Number, which is located on the scale serial plate. Retain this information for future reference.
Serial No. _______________________________________________.
Scale Version
The firmware version is shown when the scale is booted up. The version number can be seen at the bottom right of the screen during
the logo splash. The firmware version can also be checked by pressing the MENU button → SETUP MENU → SYSTEM SETUP → VIEW
VERSION NUMBER.
Features
❑
Easy to read, LCD Graphics display
❑
Automatic Calibration
❑
Multiple Tare Weights
❑
No Moving Parts
❑
Large Memory Capacity
❑
Eight Unit Conversions Standard
❑
High Accuracy Parts Counting on Many Models
❑
Automatic or Numeric Entry Tare
❑
Sealed “Click
-
Type” Control Panel
❑
Intrinsically Safe SAW Load Cell
❑
Computerized Self Testing
❑
Automatic Zero Tracking
❑
Full Text and Floating-Point Entry
❑
On Line Help
❑
Optional Weight Average Function
❑
Optional Windows Interface Software
❑
Optional Setpoints
Precautions
1.
Prevent inflammables and liquids from entering scale head.
2.
Allow clearance on all sides of scale platform for accurate weighing.
3.
Do not drop large loads on scale platform.
4.
NEVER EXCEED THE RATED CAPACITY OF THE SCALE.
5.
Do not pull on the connecting electrical cables.
6.
Make sure that the scale and ramps are properly secured to the floor.
Best Conditions for Weighing
1.
The scale should be level.
2.
Best operating temperature is about 68 degrees F.
3.
The weighing area should be kept clean and dry.
4.
The surface that the scale is resting on should be of solid construction and not prone to vibrations.
5.
Don’t install the scale near heater or air conditioner vents.
6.
Avoid drafts.
7.
When connecting the scale to an AC power using a Safety Barrier, please utilize a stable AC power supply. Avoid heavy
motorized equipment on the same power line.
8.
Do not operate the scale in close proximity of RF transmitters like cell phones and walkie-talkies.
9.
Warm-up the scale before use.
This Manual
This instruction manual covers the installation and operation of the MKE-5-IS Intrinsically Safe SAW Scale. Indicated below are the
manual’s current revision number and number of pages. Please check this manual and its
control drawings for missing pages. The
installation cannot continue unless all pages are present.
Instruction Man #4501
MKE-5-IS SAW Instruction Manual
40 Pages
