Arlotto AR1200 series, Getting Started Manual

Page: 40 / 48

40

Enable Audio: This will switch ON/OFF the audio in camera

Audio Mode: You can change the audio mode in the Network camera in one of the
following ways:

Only Mic: Enables only audio capture in camera.

Only Speaker: Enables only audio playback in camera.

Both Mic & Speaker: Enables both audio playback & capture in camera.

Input Volume: Sets the input capture gain, values set from 1-100

Encoding: Set which codec is used for encoding.

G711

AAC-LC

Sample Rate: Supports 8 KHz and 16 KHz sampling options from this drop down menu.

Bit- Rate: Auto(64Kbps)

Alarm Level: Set the alarm level, values set from 1-100.

Output Volume: Set the audio playback volume, values set from 1-100.
3.12. Modifying Alarm Settings
Click on the Alarm settings to enable this page
Figure 3-25 Alarm Settings