8
EN
b) Pour the beverage into the machine:
WARNING:
Beverage should be poured into the
bowl (2) only when the machine is OFF (0) and un-
plugged from the electrical power supply. DO NOT
pour hot beverage.
ATTENTION:
Pour the beverage into the LEFT bowl
(2) that on temperature control box (4) side if LEFT
bowl (2) is being used only.
• Remove the bowl lid (1) of the bowl (2).
• Pour the beverage into the bowl (2) with care and
ensure between
MIN
and
MA
level. (See Fig. 7).
• After pouring/refilling the beverage into the bowl
(2), close the bowl lid (1) on top of the bowl (2).
MA
MIN
Fig. 7
c) Start operating the machine:
• Press down the cover of the main switch box (4)
at RIGHT side of the machine. Then, switch box
cover will then release.
• Switch ON the machine by pressing down but-
ton (a) to the “I” position. Red indicator lights ON.
Cooling process will then start.
• Press down either the stirring button (b) [for
LEFT bowl] or button (c) [for RIGHT bowl] to the
“I” position for rotating the paddle.
• Press down all buttons (a), (b) & (c) to the position
“0” position to switch OFF the machine.
(a)
(b)
(c)
d) Setting the temperature:
• Similarly, press down the lower part of
temper-
ature box cover
at LEFT side of the machine.
Then, temperature box cover will then release.
• Rotate the temperature control knob (d) to set the
temperature of the bowl (2).
• Temperature range for selection [Level 02 (2°C)
~ Level 08 (8°C)].
(d)
e) Dispensing the beverage:
• Once the beverage is sufficiently cooled, push the
tap lever (7) to dispense the drink.
Note:
• Regularly check the temperature of the beverage
in the bowl (2). Keep the machine running when
there is any liquid inside the bowl (2).
• If the machine is not continuously operated, it is
necessary to dispose of the small amount from
the tap area before serving for the customer for
the reason of hygiene.
Summary of Contents for 425206
Page 99: ...99 ...
