9
EN
Note: The cycle starts from the time the appliance is initially powered up
Manual Defrost:
• Press and hold the DEFROST and UP button for 3s;
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
Temperature setting and control (CAREL)
The front panel of the thermostat
1. Machine On/Stand -by (keep pushed)
2. Programming key (service agent only)
3. Manual defrost (keep pushed)
4. Defrosting light
5. Compressor operation light
How to turn the machine in ON / STAND -BY status
• Press and hold the
key for 3s, the machine will turn from ON to STAND -BY status and vice-versa.
How to unlock the keyboard (»Loc» message)
• Push SET button for more than 3s, «PS» message will appear and the keyboard will be unlocked.
Note: For safety reasons the keyboard locks automatically after 60s of keys inactivity.
To execute any operation, please unlock the keyboard first.
How to see and modify the set point
• Push and immediately release the SET key, the set point will be showed and starts blinking;
• To change the set value push UP or DOWN arrows within 20s.
• To memorize the new set point value push the SET key again or wait 20s.
Automatic defrost
• The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual Defrost:
• Press and hold the UP and DOWN button for 3s;
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
