8
EN
How to change the set point
• Push the SET key for more than 2 seconds to change the set point value;
• The value of the set point will be displayed and the “°C” starts blinking;
• To change the set value push the up or down arrows within 15s.
• To memorise the new set point value push the SET key again or wait 15s.
Automatic defrost
• The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual Defrost:
• Press and hold the DEFROST button for 5 seconds.
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
Temperature setting and control (EVCO)
The front panel of the thermostat
1. Compressor operation light
2. Defrosting light
3. Energy saving light
4. Stand-by light
5. Programming key (service agent only)
6. Machine On/Stand -by (keep pushed)
7. Manual defrost (keep pushed)
How to turn the machine in ON / STAND -BY status
• Press and hold the
key for 4s, the machine will turn from ON to STAND -BY status and vice-versa.
• During the button hold the
LED will blink to show status changing.
How to unlock the keyboard (»Loc» message)
• Push any button for more than 2s, «UnL» message will appear and the keyboard will be unlocked.
Note: For safety reasons the keyboard locks automatically after 30s of keys inactivity. To execute any operation, please unlock the keyboard
first.
How to see and modify the set point
• Push and immediately release the SET key, the set point will be showed and starts blinking;
• To change the set value push UP or DOWN arrows within 20s.
• To memorize the new set point value push the SET key again or wait 20s.
Automatic defrost
• The appliance will automatically run defrost cycles.
