b) Vertical Style:
Place the side shelve that with the L shape hook in the bottom to hold the board.
Like below:
3. Push the white button to release
the control handle from the unit.
5. To raise the cradle by turning the rotating crank, turn the handle clockwise, keeping the other
hand firmly on the handlebars. Lift up to the desired height with the desired direction. Now
the board can be attached to the ceiling.
Maintenance Interval
Daily before and after
operatingWhen not in use
Maintenance Point
Clean the machine completely, in particular the sliding parts
and the gear-pulley assembly.
Failure
The drywall won’t move.
The cradle won’t fall.
Possible Cause
The castors are locked by brake.
The locking device is open like the
image below.
Corrective Action
Release the brake on castors.
Check the locking device and
lock as shown here.
The cradle won’t move.
The control handle is locked
as shown here.
Release the control handle.
!
!
!
The hooks are forward
!
4. Pull the control handle down to the horizontal position.
8 of 12
9 of 12
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in
accordance with the following recommended procedures. It is recommended that the general
condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles
dry, clean, and free from oil and grease. The following chart is based on a normal operation
schedule.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
150-Lb. Drywall and Panel Hoist
OWNER’S MANUAL
150-Lb. Drywall and Panel Hoist
OWNER’S MANUAL
150-Lb. Drywall and Panel Hoist
OWNER’S MANUAL
150-Lb. Drywall and Panel Hoist
OWNER’S MANUAL
