manualshive.com logo in svg

Arkray Glucocard Shine, User Manual

The Arkray Glucocard Shine glucose monitoring system offers accurate blood sugar readings with user-friendly features. To get started, simply visit our website and download the free user manual to ensure hassle-free setup and optimal usage. The manual can be easily downloaded from manualshive.com for comprehensive guidelines and troubleshooting assistance.

Share
Download
background image

50

   www.arkrayusa.com

Warranty Information

Manufacturer’s Warranty

ARKRAY USA, Inc. warrants that the GLUCOCARD Shine Meter 

shall be free of defects in material and workmanship in normal 

use for a period of five (5) years. The meter must have been 

subjected to normal use. The warranty does not cover improper 

handling, tampering, use, or service of the meter. Any claim 

must be made within the warranty period.
The ARKRAY USA, Inc. company will, at its discretion, repair or 

replace a defective meter or meter part that is covered by this 

warranty. As a matter of warranty policy, ARKRAY USA, Inc. will 

not reimburse the consumer’s purchase price.

Obtaining Warranty Service

To obtain warranty service, you must return the defective meter 

or meter part along with proof of purchase to ARKRAY USA, Inc.

Summary of Contents for Glucocard Shine



















































Reviews:

No comments

Related manuals for Glucocard Shine

Accu-Chek Compact User Manual preview
Compact
Brand: Accu-Chek Pages: 60
Palmdoc PalmDoc II Owner'S Manual preview
PalmDoc II
Brand: Palmdoc Pages: 68
Beurer GL42 Instructions For Use Manual preview
GL42
Brand: Beurer Pages: 32
McKesson TRUE METRIX PRO Instruction Manual preview
TRUE METRIX PRO
Brand: McKesson Pages: 48
MENDOR GM01CAB User Manual preview
GM01CAB
Brand: MENDOR Pages: 24
MENDOR DISCREET User Manual preview
DISCREET
Brand: MENDOR Pages: 88

Brands by name

Popular brands

Load more brands