Arkray GLUCOCARD Expression User Instruction Manual Download Page 52

Page: 52 / 80

Step 4:

Gently bring the test strip to the drop of blood at a slight

angle. The test strip acts like a straw to pull the blood in.

Keep the test strip in the blood drop until the meter beeps

to indicate the test strip has enough blood.

Step 5:

The screen will start to count down. After 6 seconds,

your glucose test result will appear on the meter display

screen and announce verbally if you have the voice feature

turned on. Your test result will be automatically stored into

the meter memory.

CAUTION:

• If you see “

” or “

” displayed, your blood

glucose level may be above 600 mg/dL or below

20 mg/dL. Test again using fingertip testing,

DO NOT test on forearm. If you receive the

same result, call your physician or healthcare

professional immediately.

Summary of Contents for GLUCOCARD Expression

















































































Search results

Summary of Contents for GLUCOCARD Expression

Reviews:

Related manuals for GLUCOCARD Expression

Brands by name

Popular brands

Arkray GLUCOCARD Expression, User Instruction Manual

Search results

Summary of Contents for GLUCOCARD Expression

Reviews:

Related manuals for GLUCOCARD Expression

Brands by name

Popular brands