1.
2.
3.
On-Wall Mounting the Control Panel
The Control Panel was supplied with two L shipped brackets with a 90 degree bend.
The long side of the two brackets should be screwed into the wall with two screws per
bracket, and the short side should protrude out from the wall at the bottom. The hole
centres of the two brackets should be 108mm apart. The vertical distance between the
hole centres on each bracket is 60mm.
Once both brackets are secured to the wall, position the Control Panel such that the two
mounting holes on it's base rest on top of the holes in the two brackets.
Use the two supplied screws to secure the Control Panel to the brackets.
7