3.
4.
5.
6.
1.
2.
1.
a.
2.
a.
b.
Click "ABAS" on the right.
On the right, click "Clear data".
Power cycle the Control Panel by removing and reinserting the power.
After the device has started, you can now enter a new IP Address and click "Save".
Enabling/Disabling the Blue LED Lighting
Once the Control Panel has started and is showing the control interface, long press
the upper left corner of the screen for 8 seconds to bring up a dialog box.
Press the button to enable or disable the blue LED lighting.
In-Wall Mounting the Control Panel
The visible part of the Control Panel in front of the wall measures 182mm W x 121mm H x
15mm D. This bracket can also be used for surface mounting using the 75mm x 75mm VESA
holes.
Make the cutout for the Control Panel:
Make a cutout in the wall 160mm W x 104mm H x 21mm D, or use the in-wall
bracket as a template.
Install the mounting bracket into the cutout:
Insert the mounting bracket into the wall cutout with the flanges at the bottom.
Use 4 screws (not supplied) to fix the bracket to the wall.
5