Pick out camera base. Using long rocking shaft and screws to install camera into camera base. The
camera is compatible with Arkbird camera. The screws of M1.6*14mm are included in the parts
package.
Assemble the camera. Keep the camera at 45 degree angle before powering on the servo. The
wire of camera servo should be connected to channel 7 (output) of Arkbid FPV. The camera will
stay horizontal while the autopilot is horizontally or vertically travelling. And the camera can
move up and down by setting the value of channel 7 to a dial in your controller.
Assemble wing fence. Using toothpick or other tools to fix position. Then stick glue to it.
