16
（
1
）
Put the airplane horizontally on the ground.
（
2
）
Enter menus of OSD (see aforesaid instruction)
（
3
）
Enter the menu SET CTL PARAMETERS (Up left photo)
（
4
）
Enter the menu NEUTRAL CHECK (Up right photo)
（
5
）
Swing the input of aileron from left to right for a few times to wait for neutral point check (Left
below photo)
（
6
）
Saving neutral point and automatically return to main menus (Right below photo)
（
7
）
Exit main menus
（
8
）
Return to the OSD for flight control
（
9
）
Complete calibration
4.
Take off
The airplane will save the location of HOME after searching satellites. Launch assistant mode and safe
throttle will be workable. Within 30m radius of the HOME, the throttle will not start unless the airplane is
in Manual Mode.
Steps:
（
1
）
Turn the mode to be Balance Mode;
（
2
）
Accelerate the throttle to the highest level;
（
3
）
Hold the airplane in hand and run a few meters;
（
4
）
Wait the throttle automatically starts;
（
5
）
Horizontally throw the airplane into air when the throttle is on;
（
6
）
The airplane will automatically climb up;
（
7
）
The airplane will be under control of radio;
After the airplane takes off
1.
The lowest speed >45km/h
2.
Do not choose Manual Mode unless it is needed.
3.
Do not use trims in Balance Mode. If the airplane noses up or down, it can be configured by radio.
4.
The power of transmitter is 500mw. The farthest receivable distance is 2.5km
5.
If the airplane will fly a long distance, the height and orientation can be preset.
6.
Keep an eye on value of battery voltage.
