background image

001.23104.EN rev

. 6

Clip Slings Application

12

Sling Selection

The  spreader  bar  that  is  attached  to  the  lift 

determines what slings can be used to transfer 

a patient. 
Slings  are  colour  coded  for  size  by  having  a 

different  colour  edge  binding  or  attachment 

strap colouring:

•  Teal - Extra Extra Small - XXS

•  Brown - Extra Small - XS

•  Red - Small - S

•  Yellow - Medium - M

•  Green - Large - L

•  Purple - Large Large - LL

•  Blue - Extra Large - XL

•  Terracotta - Extra Extra Large - XXL

Note that some sling models are not available 

in all sizes.
A wide variety of slings are available for each 

application.  Please  contact  your  local 

ArjoHuntleigh  vendor for more information.
Flites

®

 (single patient multi- use slings) are also 

available for most sling models. If ArjoHuntleigh 

Flites

 slings are to be used with the  

MAXI LITE

 

floor  lift,  refer  to  the  separate  ArjoHuntleigh 

Flites

 slings 

Instruction for Use

.

Spreader Bar Compatibility

The 

MAXI LITE

 floor lift is only compatible with 

the spreader bar that is delivered with the lift.

Fig. 18 

 

MAXI LITE

  floor  lift 

model 

that 

is 

designed for use with 

clip slings is delivered 

with  a  manual  Flat 

DPS spreader bar. 

WARNING

: Using the flat DPS with amputee 

sling may cause injuries if not used correctly.

Attachment points

Fig. 19

Shoulders

Legs

Attaching / Detaching the DPS Spreader Bar

Attaching the DPS

Fig. 20

1)  Align the DPS tube onto the lift’s attachment. 
2)  Insert the pin through the attachment.
3)  Turn  the  locking  spring  to  secure  the 

attachment.

WARNING: 

Make sure that the locking 

spring  is  correctly  engaged.  Failure  to 

do so could result in patient fall.

Detaching the DPS

Fig. 21

1)  Release the lock spring taking care not to 

pull the pin out of the tube.

WARNING: 

Pulling  the  pin  without 

holding  the  DPS  would  drop  the  DPS 

which could cause injuries.

2)  Hold the DPS from the bottom and pull the 

pin out.

3)  Pull the DPS out of the lift’s attachment.

Summary of Contents for MAXI LITE







































Reviews: