27
Always Follow these 13 Steps for
Cleaning and Disinfection
If an ArjoHuntleigh shower panel will be used, see
respective
IFU
.
Removing visual residue
(step 1-2 of 13)
1
Detach pillow, cushions and safety belt.
2
Clean
• the
Carendo
shower and toilet chair (start from
the top and move downwards)
• all removed parts
from visible residue using a cloth soaked in water
or if more suitable by spraying/showering water
using a brush and/or wipe with a clean cloth.
Cleaning
(step 3-7 of 13)
3
Put on protective gloves and eye wear.
4
Spray disinfectant on
• the
Carendo
shower and toilet chair.
• all removed parts
Use a brush soaked in disinfectant and scrub
thoroughly, especially on handles and hand
control.
5
Rinse thoroughly with water (approx. 25 °C
(77 °F)) until all the disinfectant has been
removed.
6
Soak a cloth in disinfectant and wipe all other
areas such as chassis.
7
Wet a new cloth with water and remove all traces
of disinfectant on other areas. The cloth must
occasionally be rinsed in running water when
removing disinfectant.
Disinfection
(step 8-13 of 13)
8
Spray disinfectant on:
• the
Carendo
shower and toilet chair.
• all removed parts
9
Soak a cloth in disinfectant and wipe all other
areas such as chassis.
10 Allow a disinfection time according to the
instructions on the disinfectant bottle label.
11 Spray or shower water (approx. 25 °C (77 °F)) and
wipe with a clean cloth to remove all traces of the
disinfectant . The cloth should occasionally be
rinsed in running water during removal of
disinfectant.
12 If disinfectant cannot be removed, spray water on
the affected part and wipe off with disposable
towels. Repeat until all of the
disinfectant has been
removed.
13 Let all parts dry.
NOTE
The cushion and the foam inside of it is water
repellent.
