20
Bathing
Read the separate instructions for your bathing equipment.
•
Raise the stretcher to clear the edge of the bath
(1)
. Acti-
vate the powerdrive and move the resident along the side
of the bathtub and finally push transversely to it
(2)
.
Watch out for bathtub legs.
•
Raise the bathtub to a comfortable height
(3)
, if bathtub
is adjustable.
•
Lower the stretcher so that it is resting against the bottom
of the bath.
•
Lower the backrest to a comfortable position for the res-
ident.
•
Bathe the resident.
•
After bathing, let the water run out of the bath. Raise the
backrest.Let the resident put their hands on the security
grip. Lower the bath to its lowest position. Shower the
resident
(4)
.
•
Dry the resident, as well as the underside of the stretcher,
to prevent water from dripping onto the floor prior to
moving the
Miranti
away from the bath. Raise the
stretcher
(5)
.
•
Activate the power drive and move the
Miranti
out from
the bath
(6)
.
Manual drive
•
Raise the stretcher to clear the edge of the bath and move
the resident in over the bath
(7)
.
•
Pull the
Miranti
away from the bath
(8)
.
Summary of Contents for MIRANTI CEB 8X0X
