13
NURSING CARE
It is recommended that all sections of this manual be reviewed prior to product use.
Carefully review the Indications, Contraindications, Risks and Precautions, and Safety
Information sections in the Introduction prior to performing nursing care on the MaxxAir
ETS Mattress Replacement System.
TURNING FUNCTIONS
Select turn type and duration by using the buttons located on the front panel.
CAUTION: Prior to turning, ensure that side rails are in their full upright and locked
position. See Safety Information / Turning.
•
Press RIGHT TURN button to activate right hold. Cycle time will display zero-zero
(00). Press the CYCLE button to enable mattress to turn right and back to center
and adjust turn time from 3-30 minutes.
•
Press LEFT TURN Button to activate left hold. Cycle time will display zero-zero
(00). Press the CYCLE button to enable mattress to turn to left and back to center
and adjust turn time from 3-30 minutes.
• Press CONT TURN Button to continuously turn mattress to the right, back to
center, to the left, and back to center.
• Press STATIC to de-activate all functions.
Cycle time can be adjusted from 1-20 minutes in one-minute increments and from
20-30 minutes in five-minute increments.
ALARM
The alarm will only sound when power to the unit has been interrupted or turned off. If this
occurs, push Alarm Reset Button on front of unit, and / or re-apply power.
MINUTES
CYCLE
LEFT
TURN
CONT
TURN
RIGHT
TURN
STATIC
INSTA-
FLATE
ALARM RESET
POWER
FAILURE
