18
Transfer from the Bed
Lateral Transfer
(21 Steps)
(For lateral transfers always use a sliding aid. For sliding aid
instructions, see respective sliding aid
IFU
.)
1 Fold down the
Carevo
shower trolley side support on the
transfer side and lower the adjustable back support, if avail-
able.
2 Apply the brakes on the bed.
3 Adjust the bed to an ergonomic height.
4 Place the sliding aid (tube/sheet) under the patient.
(Use local technique)
(See Fig. 1)
5 Place a pillow under the patient’s head.
6 Fold down the bed rail on the transfer side.
7 Position the
Carevo
shower trolley next to the bed’s transfer
side.
8 Fold down the
Carevo
shower trolley mattress on the
transfer side. Press down and fixate the
Carevo
shower
trolley mattress corners between the head/foot panel and
support plate.
(See Fig. 2)
9 Adjust the
Carevo
shower trolley height so that its slightly
lower than the bed.
(See Fig. 3)
Push the
Carevo
shower trolley against the bed
.
Continue with the steps on the next page.
NOTE
If there is a gap between the bed and the
Carevo
shower trolley, place a sliding board in between the
two to bridge the gap.
10
WARNING
To avoid the device in use from tipping, do not
raise or lower other equipment close to it and be
aware of stationary object when lowering.
Fig. 1
Fig. 2
Fig. 3
Summary of Contents for Carevo
