Arjo AtmosAir SAT 4000 Series, Instructions For Use Manual

Page: 16 / 40

12
Patient Placement and Nursing Care
It is recommended that all sections of this User Guide be read prior to product use.
Carefully review the
Contraindications
,
Safety Information
and
Risks and Precautions
sections prior to placing a patient on any AtmosAir MRS.
1. Transfer patient following all applicable safety rules and institution protocols.
2. Center patient side-to-side and head-to-foot on AtmosAir MRS surface.
3. Ensure all sections of the mattress fully support the patient.
Mattress handles are for mattress transport only.
Alternating Pressure / Rotation Adjustment
The
AtmosAir
with
SAT
9000,
APod 25
and T-Series models provide alternating pressure
and / or rotation. The level of alternating pressure or rotation can be adjusted for patient
comfort.
Prior to engaging alternating pressure or rotation, ensure that bed
frame has side rails and that all side rails are fully engaged in full
upright and locked position. Observe patient during initial turning
cycles to ensure proper patient placement
Ensure pump hoses are properly connected to appropriate side of
mattress for the desired function (see Pump Installation).
• Rotate the control knob on the pump
clockwise to increase the intensity of
alternating pressure relief or the level of
rotation.
• Rotate the control knob on the pump
counter-clockwise to reduce the intensity
of alternating pressure relief or the level of
rotation.
The AtmosAir MRS DOES NOT
provide a Nurse Hold function.
FIRM SOFT
ALTERNATING PRESSURE
MAX. MIN.
ALT. PRESSURE / ROTATION
Figure 8 (120V)
Figure 8a (230V)