Mattress and Seat Systems Service Manual
Repair
Page 37
4
Installing the Top Cover
All Cover Types
4.1
Position the top cover over the mattress or seat.
Note:
Make sure that the cover is placed the correct way round, with the feet logo and/or Arjo
logo facing up and situated at the feet end of the mattress or seat.
4.2
If a CPR plug is fitted to the head end of the manifold assembly, feed the CPR swing label and
web assembly out between the top cover and the mattress before securing the top cover,.
Note:
Make sure that CPR swing label and web assembly passes freely between the top cover
and mattress or seat, and does not get trapped.
Zipped Top Cover
4.3
Zip the sides of the top cover to the mattress or seat, and connect the velcro strips at the head
and foot end of the mattress.
Studded Top Cover
4.4
Connect the press studs together on all four sides of the top cover.
Strapped Top Cover
4.5
Carry out either of the following procedures, depending on the strap configuration:
4.5.1
Top covers secured with straps and buckles which pass under the mattress:
4.5.1.1
Pass each strap underneath the mattress, and fasten to the strap buckle on
the opposite side of the cover.
4.5.2
Top covers secured with elasticated corner straps.
4.5.2.2
Pass the elasticated loops over the corners of the mattress.
