Mattress Installation
Zip the protective cover over the mattress. Make sure the Arjo logo is
uppermost and at the foot end of the mattress.
Make sure the CPR unit is secured in its closed position. See Figure 1.
Pump Installation
Position the pump, feet down, on a horizontal surface or suspend from the
bed foot rail by means of the integral hanging brackets.
Connect the mattress tube-set to the pump until it clicks into place, check
that tube-set is not twisted. Make sure it is securely connected to the pump.
See Figure 2.
Insert the mains power plug into a suitable mains power socket.
Figure 2
Figure 1
CPR
Quick Start
3UHVVWKH2Q2ႇEXWWRQRQWKHVLGHRIWKHSXPS$OORZ
DSSUR[LPDWHO\PLQXWHVIRUWKHPDWWUHVVWRIXOO\LQÀDWH
WARNING
Do not place the patient on the mattress until it is fully
LQÀDWHG
Active Mode Support Setting Procedure
Place a sheet over the mattress replacement and tuck it in loosely.
Make sure the CPR unit is clearly visible at the head end of the bed.
1. Lie or sit the patient on the mattress.
2. Press and hold both the plus (+) and minus (–) buttons for at
least 3 seconds to reset the mattress pressure to the default
comfort (Equivalent to patient weight 100 kg) control level (4
LEDs light up).
3. The Semi-automatic functionality of the pump operates only
when in default mode, Active (Alternating). This functionality
senses the patient weight and adjusts the pressure in the
cells. This function provides only an assisted adjustment of
mattress cell pressures within a pre-set patient weight setting
range, operating in conjunction with the caregiver’s selection of
pressure setting. Within each weight setting range, for individual
adjustments, caregiver selection of pressure setting should
be considered in order to ensure selection of appropriate cell
pressures to support the patient.
4. Within 20 minutes the pump has adjusted to the correct
pressure.
Reactive Mode
Provides a stable, non-moving support surface for instances where
an active support surface is contra-indicated. In Reactive mode the
VXSSRUWVXUIDFHUHPDLQVFRQVWDQWDOOFHOOVDUHHTXDOO\LQÀDWHG
Additional nursing assessment must be undertaken in order to direct
an individualized repositioning programme.
In Reactive mode the pump automatically reduces the pressure in
the mattress to increase patient comfort.
NOTE
,WPD\EHQHFHVVDU\IRUWKHFDUHJLYHUWRVHWWKHFRPIRUW
VHWWLQJDFFRUGLQJWRSDWLHQWZHLJKWEHIRUHXVLQJWKH
V\VWHP
At lower patient weights (for example, lower than 60 kg), it
PD\EHQHFHVVDU\WRFRQVLGHUXVHRIWKHV\VWHP¶V¶PDQXDO
RQO\¶PRGHWRHQVXUHSUHVVXUHVHWWLQJLVVSHFL¿FDOO\VHW
DFFRUGLQJWRSDWLHQWZHLJKW
$WKLJKHUSDWLHQWZHLJKWVLWPD\EHQHFHVVDU\WRFRQVLGHU
XVHRIWKHV\VWHP¶V¶PDQXDORQO\¶PRGHDQGWRFKHFNIRU
SDWLHQWERWWRPLQJRXW
7KHVHDGMXVWPHQWVDQGFKHFNVVKRXOGEHLQFRQMXQFWLRQ
with independent clinical determination of appropriate
VXSSRUW
648932EN_02 • 05/2022 • Page 2/3
