Pre-installation Checks
Installation of a fireplace must be according to local codes and regulations in each
country. All local regulations, including those which refer to national and European
standards, must be observed when installing the product.
Both an installation manual with technical data and a manual on general use and
maintenance are enclosed with the product. The installation can only be used after it
has been inspected by a qualified inspector. A name plate of heat-resistant material is
affixed to the product. This contains information about identification and
documentation for the product.
Installation Introduction with Technical Data
1. Technical data
Material: Cast iron
Finish: High-temp. Resistance paint
Fuel: Multi-fuel
Log length, max.:
30cm
Flue outlet: Top rear
Flue pipe dimension:
- Inside: 150 mm/175 cm
2
cross section
Approx. weight: 74.5kgs
Wood logs
Ancit
Total Efficiency
%
78.5
75.7
Nominal heat output
kW
4.7
5.0
Mean CO emission (at 13 % O
2
) %
0.28
0.18
Mean flue gas temperature
ºC
295
306
Flue gas mass flow
g/s
3.6
4.0
Mean C
n
H
m
emission
Nmg/m
3
509
Mean NOx emission
Nmg/m
3
35
DIN Plus particulates
Nmg/m
3
35
