Final Engine Assembly
Make sure that the cylinders are secure to the crankcase.
Shown above in the illustration is a LeRhone configuration of
the kit. note that the cylinder as shown has the
pushrods to the back and has an additional piece of tubing
installed to simulate the exhaust pipe. Pushrods on Gnomes and early
LeRhones were installed to the front. Check your scale
documentation for the correct method of assembly.
Assemble the Williams Brothers engine cylinders as per directions. Engine Cylinders
can be modified to build as a Gnome or Clerget refer to photos of the engine or call
for assistance and additional technical support.
Brass Hardware
Step 3
Side
View
C/L
Some designs require an additional
part “B”. Additional parts available.
Fill if not used
9 Cylinder Gnome
LeRhone Aircraft Engine
ALL SCALES CONSTRUCTION DIAGRAM
With Clerget and Gnome variations
COMPONENTS OF THIS DESIGN GRAPHIC AND REPRESENTATION ARE REPRODUCED
WITH THE PERMISSION OF WWI AERO AND AIR AGE PUBLICATIONS
ARIZONA MODEL AIRCRAFTERS
A registered tradename of Digital Design LLC.
13814 N. 56th Place, Scottsdale Arizona 85254
SHEET 2 of 3
Copywrite 2006 by Arizona Model Aircrafters
a registered tradename of Digital design LLC
N
A
RIZ
A
Model Aircrafters
www.arizonamodels.com
