Arize ASL120 Series Manual Download

Page: 2 / 6

Installation

Installation Diagram

1. Prepare one cross point screwdriver before installation

2.Slide the battery cover and unscrew the 3pcs screws,then take off the back plate
and pad.

Please confirm whether to adjust the mortise lock based on the distance I from the
center hole to door frame.

The default Backset of the mortise lock is 60mm. If need to change,please follow the
below instruction:

Summary of Contents for ASL120 Series

Page 1: ...e operation and installation Packing NO Model Type Quantity Note 1 Front Plate 1 2 Back Plate 1 3 Mortise lock 1 4 Battery cover 1 5 Accessories 1 6 Battery 1 4pcs group Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment ...

Page 2: ...ide the battery cover and unscrew the 3pcs screws then take off the back plate and pad Please confirm whether to adjust the mortise lock based on the distance I from the center hole to door frame The default Backset of the mortise lock is 60mm If need to change please follow the below instruction ...

Page 3: ...de direction please adjust the latch to release with screwdriver 5 Install the front plate and back plate as the diagram the cylinder trail of the front plate need be horizontal 6 Combine the lines to the plug on the back plate then install the back plate on the back pad Please fasten the extra lines to the back pad rather than stuff the lines to the holes ...