41
User’s Manual
STN-1000
41
CONNECTOR PANEL
PHONES
2 1
AUDIO
IN
OUT
1.
PEDAL JACK
- Plug the Pedal cable into this connector.
2.
USB
- The USB connector allows you to connect the piano directly to your
computer’s USB port. Do not turn on the piano with the USB cable
connected to the computer to avoid having to restart your computer.
3.
MIDI IN
- This piano contains MIDI Input and MIDI Output ports. MIDI
jacks allow communication with other products equipped with MIDI
interfaces. Please see the MIDI section of this manual for further details.
4.
MIDI OUT
- This piano contains MIDI in and MIDI output ports. MIDI
jacks allow communication with other products equipped with MIDI
interfaces. Please see the MIDI section of this manual for further details.
5.
AUDIO IN
- These stereo audio input jacks will amplify the supplied
signal of other electronic instruments through the internal amplifier and
speakers within the piano. They can be used to hook up items such as
CD players, MP3 players or Tape players.
6.
AUDIO OUT
- These stereo audio output jacks supplies the piano’s
output signal to external amplification, such as home stereo, PA system
or other stand alone amplifiers.
CONNECTOR JACKS
- These connector jacks are located underneath the piano.
1
2
4
3
PEDAL JACK
5
HEADPHONES
- You can play in total silence, without disturbing others in the
room, by plugging a set of headphones into one of the appropriate sockets
located on the left side underneath the keyboard. When headphones are
plugged into either of these jacks the main speaker system is turned off. Two
sets of headphones may be used at the same time.
IN
OUT
MIDI
USB
6
HEADPHONE JACKS
- The Headphone jacks are located UNDERNEATH the piano, beneath
the control panel.
CONNECTOR PANEL
1
2
3
4
5
6
Summary of Contents for STN-1000
Page 1: ...STN 1000 digital piano User s Manual ...
Page 44: ......