Arius STN-1000, User Manual

Page: 30 / 44

32
User’s Manual STN-1000
32
FUNCTION PIANO KEY CONTROLS
TUNE - When the HP-3 is turned on, the keyboard’s pitch is automatically set to Standard A440 concert pitch.
However if a different pitch is desired, the piano’s tuning range can be adjusted in one cent increments. It
has a range of + to - 50 cents. The pitch is adjusted in one cent increments every time the key is pressed.
This function allows you to adjust the piano’s pitch to match a recording or another instrument in an en-
semble.
1. Put the HP-3 into Function mode by pressing the Reverb/Effect button
and the Metronome button simultaneously, both respective LED’s will
begin to flash.
2. Press the E3 Tuning Function Piano key , this will put the piano into
Tuning Function mode.
3. Press the B0 Tuning Increase Piano key, or the A0 Tuning Decrease
Piano key and release it, to raise or lower the pitch of the piano by one
cent. These keys adjust the pitch by 0.5Hz each time they are
pressed.
Note: To hear a noticeable pitch change we suggest that you press and
release the selected value button about twenty times.
You can restore the tuning to its default setting by pressing
both the A0, and the B0, keys simultaneously.
4. Press the Voice Select button to return the HP-3 to normal operating
mode with the selected Tuning adjustment.
TO ADJUST THE TUNING OF THE PIANO
E3 A0 B0
TUNE - 1 CENT
TUNE + 1 CENT
TUNING FUNCTION KEY
VOICE SELECT
F
U
N
C
T
I
O
N
REVERB/
EFFECT
METRONOME
29
FUNCTION PIANO KEY CONTROLS
FUNCTION MODE - To enter into the Function Mode:
FUNCTION MODE - The Function mode gives you access to these other features of the HP-3 piano.
Touch Normal
Transpose 0
Tuning A4=440.0Hz
Reverb On
Duet Piano Lesson Off
MIDI Channel Select Channel 1
Multi-Timbral Mode On/Off Off
Transmit MIDI Program Change On
RESETTING TO DEFAULT SETTINGS - When the power is turned on, these functions are always
set to the default settings.
1. Press the Reverb/Effect button and the Metronome button simultaneously.
The LED’s for both buttons will begin to flash.
Note: When the HP-3 is in Function Mode with both Reverb/Effect and
Metronome button Led’s flashing, there will be no sound from the piano
keys.
2. Press the designated piano key or keys to change the value for the
selected function. See the various Functions listed above.
1. To exit the Function Mode press the Voice Select button. The Reverb/
Effect button will stop flashing but remain on. The Metronome button
will turn off.
2. Play the piano, you should hear the piano notes play with your se-
lected function engaged. It may be necessary to increase or decrease
your selected function.
1. At any time you can easily put the piano back to its default factory
settings. Hold down the Demo/Song button and the Reverb/Effects
button and the piano will reset to the default settings below.
TO EXIT THE FUNCTION MODE
PIANO TOUCH
C8 C7 C6 C5 C4 C3 C2 C1
TRANSPOSE
TUNING
DUET PIANO LESSON MODE
MIDI OUTPUT CHANNEL SELECT
MIDI INPUT CHANNEL SELECT
MULTI TIMBRAL MODE ON/OFF
TRANSMIT PROGRAM CHANGE ON/OFF
D3E3 F3 G3 A3 B3
VOICE SELECT
DEMO/SONG
REVERB/
EFFECT
F
U
N
C
T
I
O
N
REVERB/
EFFECT
METRONOME
29
FUNCTION PIANO KEY CONTROLS
FUNCTION MODE - To enter into the Function Mode:
FUNCTION MODE - The Function mode gives you access to these other features of the HP-3 piano.
Touch Normal
Transpose 0
Tuning A4=440.0Hz
Reverb On
Duet Piano Lesson Off
MIDI Channel Select Channel 1
Multi-Timbral Mode On/Off Off
Transmit MIDI Program Change On
RESETTING TO DEFAULT SETTINGS - When the power is turned on, these functions are always
set to the default settings.
1. Press the Reverb/Effect button and the Metronome button simultaneously.
The LED’s for both buttons will begin to flash.
Note: When the HP-3 is in Function Mode with both Reverb/Effect and
Metronome button Led’s flashing, there will be no sound from the piano
keys.
2. Press the designated piano key or keys to change the value for the
selected function. See the various Functions listed above.
1. To exit the Function Mode press the Voice Select button. The Reverb/
Effect button will stop flashing but remain on. The Metronome button
will turn off.
2. Play the piano, you should hear the piano notes play with your se-
lected function engaged. It may be necessary to increase or decrease
your selected function.
1. At any time you can easily put the piano back to its default factory
settings. Hold down the Demo/Song button and the Reverb/Effects
button and the piano will reset to the default settings below.
TO EXIT THE FUNCTION MODE
PIANO TOUCH
C8 C7 C6 C5 C4 C3 C2 C1
TRANSPOSE
TUNING
DUET PIANO LESSON MODE
MIDI OUTPUT CHANNEL SELECT
MIDI INPUT CHANNEL SELECT
MULTI TIMBRAL MODE ON/OFF
TRANSMIT PROGRAM CHANGE ON/OFF
D3E3 F3 G3 A3 B3
VOICE SELECT
DEMO/SONG
REVERB/
EFFECT
F
U
N
C
T
I
O
N
REVERB/
EFFECT
METRONOME
29
FUNCTION PIANO KEY CONTROLS
FUNCTION MODE - To enter into the Function Mode:
FUNCTION MODE - The Function mode gives you access to these other features of the HP-3 piano.
Touch Normal
Transpose 0
Tuning A4=440.0Hz
Reverb On
Duet Piano Lesson Off
MIDI Channel Select Channel 1
Multi-Timbral Mode On/Off Off
Transmit MIDI Program Change On
RESETTING TO DEFAULT SETTINGS - When the power is turned on, these functions are always
set to the default settings.
1. Press the Reverb/Effect button and the Metronome button simultaneously.
The LED’s for both buttons will begin to flash.
Note: When the HP-3 is in Function Mode with both Reverb/Effect and
Metronome button Led’s flashing, there will be no sound from the piano
keys.
2. Press the designated piano key or keys to change the value for the
selected function. See the various Functions listed above.
1. To exit the Function Mode press the Voice Select button. The Reverb/
Effect button will stop flashing but remain on. The Metronome button
will turn off.
2. Play the piano, you should hear the piano notes play with your se-
lected function engaged. It may be necessary to increase or decrease
your selected function.
1. At any time you can easily put the piano back to its default factory
settings. Hold down the Demo/Song button and the Reverb/Effects
button and the piano will reset to the default settings below.
TO EXIT THE FUNCTION MODE
PIANO TOUCH
C8 C7 C6 C5 C4 C3 C2 C1
TRANSPOSE
TUNING
DUET PIANO LESSON MODE
MIDI OUTPUT CHANNEL SELECT
MIDI INPUT CHANNEL SELECT
MULTI TIMBRAL MODE ON/OFF
TRANSMIT PROGRAM CHANGE ON/OFF
D3E3 F3 G3 A3 B3
VOICE SELECT
DEMO/SONG
REVERB/
EFFECT
F
U
N
C
T
I
O
N
REVERB/
EFFECT
METRONOME
FUNCTION PIANO KEY CONTROLS