
Simply platform lifts
20110
609
© ARITCO
6
5 Shaft modules
5.2 U5 connections
5.1 U5 Functions
Resets the Door blocking, circuit b30–b31.
A steady lit button indicates a closed curcuit. A flashing button indicates
an open circuit. Reset by pushing the button until a sound is heard (approx.
2 seconds).
Resets the Service alarm relay. If lit, see 5.4 Error alarm below.
Resets the Lift occupied mode.
[
see page 3
]
Up and Down buttons enable manual emergency override while the lift is within
the operating zone.
The Emergency run limit swich button, in combination with the Up or Down
button, makes it possible to force the lift back into the operating zone if it has
exceeded its limits, i.e. gone too far up or down. Exceeded limit is indicated by
flashing Emergency run limit button when Up or Down button is pushed.
In order to test the friction keep the Friction test button pressed down. The lift
will move down for approx. 2 seconds followed by a motor stop with open
brakes – thus leaving the cabin to stop shortly by itself due to screw friction.
You can activate a Call from another floor (above or below):
•
Keep the Service alarm reset button pressed down and
•
push either Up or Down button – a call will be made.
* LED indicator
+
+
Summary of Contents for 7000 Series
