(8) If you are suffering from an illness, you should use it with caution unless you get
permission from a doctor.
(9) Please turn off the equipment's power switch if no one uses it, and ensure the
main power is off before the exit of related personnel to guarantee the
equipment's safety.
(10) It's advised to stop taking other weight-loss medicines for 1 to 2 months before
treatment if you are taking them now. The course of treatment shall be extended
if you want to take it immediately.
(11) Do not use the equipment with an empty stomach, and wait at least one hour
after a full meal before starting a weight reduction treatment.
(12) When operating the instrument, it should contact the skin thoroughly to avoid
uneven heating.
(13) When operating the equipment, start from the lowest energy level and gradually
increase it after the client gets used to it.
(14) You must keep the treated parts moist and avoid operation in dry skin conditions
when operating the instrument.
(15) Do not set the suction of Body Vacuum & RF too high; otherwise, the skin may
feel pain due to drag force.
(16) Remember that you can not use Cavi around the chest or parts with many
skeletons, such as head, back, and breast.
(17) To not scare the client, please inform him of the feelings before operating BIO.
(18) To avoid discomfort caused by overheating, please avoid the air outlet when
operating the hot & cold hammer.
(19) You must keep the treated parts moist and avoid operation in dry skin conditions
when operating the instrument. (You should operate the laser pads under dry skin
conditions; otherwise, they may get damaged due to dampness.)
(20) When using the laser pads, their whole surface should contact the skin
thoroughly; they can not only touch a small area.
(21) A better effect can be achieved with the combined use of laser pads with
massage and other equipment.
(22) Laser pads can also be used separately. Just fasten it onto the fatty part for about
30 minutes. A better effect can be achieved with the combined use of hand
technique.
(23) After the operation, clean the equipment with normal saline to ensure its
cleanliness and hygiene so that its service life can be extended.
(24) Use the equipment and train the operators in strict accordance with the
instructions specified in the manual.
4. Troubleshooting
(1) I can’t start the equipment.
A. Make sure you plug the power cord into a good power socket.
B. Check whether the fuse in the back is loose or burnt out.
Summary of Contents for SD-9XS1SB
Page 1: ...User Manual SD 9XS1SB ...
