Ariston NMBL 19 Series Operating Instructions Manual Download

Page: 18 / 48

Installation

Before placing your new appliance into operation please read

these operating instructions carefully. They contain important
information for safe use, for installation and for care of the
appliance.

Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to
operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm
between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in
the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical
socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on the
bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values

indicated on the data plate located on the bottom left side
(e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised
technician to replace it (

see Assistance

). Do not use

extension cords or multiple sockets.

Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

The cable must not be bent or compressed.

The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

The manufacturer declines any liability should these safety

measures not be observed.

Accessories

Refrigerator compartment

SHELVES:

with or without grill.

Due to the special guides the shelves are removable and the
height is adjustable, allowing easy storage of large containers
and food. Height can be adjusted without complete removal of
the shelf.

FRESH BOX

for fresh meat and fish. Due to the

compartment’s low temperature (the coldest in the refrigerator)
and to the clear door that provides protection against oxidation
and blackening, food can be stored for even up to one week. It
can also be used for “cold meals.”

ODOUR FILTER

Some models are fitted with a new odour filter

with active carbons, which ensures better air quality inside the
refrigerator.
The filter is located on the bottom left side, inside the FRUIT and
VEGETABLE compartment.

TEMPERATURE

Indicator light

: to identify the coldest area in

the refrigerator.

1. Check that OK appears clearly on the indicator light (

see

diagram

2. If the word “OK” does not appear it means that the temperature

is too high: adjust the REFRIGERATOR OPERATION knob to a
higher position (colder) and wait approximately 10 hours until
the temperature has been stabilised.

3. Check the indicator light again: if necessary, readjust it

following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK. Wait at
least 10 hours before adjusting the REFRIGERATOR
OPERATION knob to a higher setting.

Freezer compartment

ICE CARE tray

The fact that they are situated on the top part of the freezer
drawers ensures greater cleanliness: the ice no longer comes
into contact with the food placed inside the freezer compartment;
furthermore, the dripping of the water during filling is avoided (a
lid to cover up the hole after filling with water is also provided).

1. Pull out the tray by pushing it up.
Check that the tray is ompletely empty and fill it with water

through the opening provided.

2. Take care not to exceed the level indicated (MAX WATER

LEVEL). Excess water prevents the ice cubes from dispensing
(if this happens, wait for the ice to melt and empty the tray).

Available only on certain models.