Ariston L 64 Instructions For Installation And Use Manual Download Page 6

Page: 6 / 16

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

How to load your dishes

First of all.

Before placing the dishes in the

racks, remove the largest scraps

of food left over on your plates,

you will thus avoid blocking the

filter, which would reduce the

efficacy of the wash.

If the saucepans and frying pans

are very dirty, allow them to soak

before being washed. To make it

easier to load your dishes, pull the

racks out.

Multisystem racks

This dishwasher model is fitted with

newer and more modern upper and

lower racks and a cutlery basket.

They are made to provide greater

flexibility in loading dishes, making

them more suitable to meet your

specific needs.

What goes into the

lower rack?

We recommend you place the most

difficult dishes to wash into the

lower rack: saucepans, lids, soup

dishes and plates, but also: mugs,

cups and glasses (see photos for

load examples).

 Serving dishes and large

lids:

place them on the sides

of the rack.

 Saucepans, salad bowls:

must always be placed upside

down

 Very deep dishes:

place

them obliquely, thus allowing

water to run down them and

cleaning them better

Glasses and cups:

position

them as indicated in the figure.

When you only have little cutlery

to wash, you can use just half the

basket; save space for other

crockery or place the other half of

the basket in the upper rack instead

(see figures A and B).

This basket is equipped with two

removable grids: insert the cutlery

one by one into the slots; knives

and utensils with sharp blades or

tips should be positioned with the

sharp parts at the bottom.

Position all cutlery items so that

they don't touch.

What goes into the

upper rack?

Place delicate and lightweight

dishes in the upper rack: glasses,

tea cups and coffee cups, saucers

- but plates too - shallow salad

bowls, slightly dirty frying pans and

shallow pans.

Position light weight dishes in such

a way as to avoid their being moved

by the spray of water.

The appliance can also be equipped

with one or two tip-up

compartments onto which you can

place mugs and cups, as well as

long sharp knives and serving

cutlery.

After loading the dishes, remember

to check that the blades on the

sprayer arms can turn freely

without hitting against any dishes.

How to adjust the top

rack.

The upper rack can be set in high

or low position to enable you to

organise your dishes effortlessly.

Before washing, a few small steps can help you get a better wash and keep your dishwasher for longer.

Remove the largest scraps of food left over on your plates, soak saucepans and frying pans with tough

incrustations. After loading your dishes, make sure the blades on the sprayer arm turn well.Do not

place glasses and cups on top of one another, and make sure the dishes are not touching.

lower rack

upper rack

Load examples

Open the rail stop flaps and pull the
rack out completely. Now place it in
high or low position, then slide it
along the guide rails until the front
wheels also go in. Now close the rail
stop flaps. Follow the sequence of
actions illustrated in figure "F".