10
ARISTON DISHWASHER - Instructions for installation and use
D
ISHWASHER
Cleaning and special maintenance
The filter assembly
f you want consistent good results
from your dishwasher, you need to
clean the filter assembly.
The food particles are removed
from the wash water, allowing it to
be recirculated during the cycle,
filtered perfectly. For this reason,
it is a good idea to remove the lar-
ger food particles trapped inside the
semi-circular filter
A
and
cup
Cafter each wash; to remove the
filter assembly, pull the cup handle
upwards. All you need to do is rinse
them under running water.
The entire filter assembly should
be cleaned thoroughly once a mon-
th: semi-circular filter A + cup C +
cylindrical filter B+ microfilter D.
To remove filter B, turn it anti-
clockwise. Use a small non-me-
tallic brush for cleaning.
Reassemble the filter parts (as sho-
Care and maintenance
wn in the figure) and reinsert the
whole assembly into the dishwa-
sher. Position it into its housing and
press downwards.
The dishwasher is not to be used
without filters. Improper replace-
ment of the filters may reduce the
efficiency of the wash and even
damage your dishwasher.
Once in a while, once a
month, spend a little
time on the filter
assembly and the
sprayer arms.
Keep your dishwasher in shape
Respecting these few rules ensures you will always
have a reliable work companion by your side.
After every wash.
When the wash cycle has ended,
always remember to turn off the
water supply tap and to leave the
appliance door ajar. This way, mois-
ture and bad odours will not be
trapped inside.
Unplug the appliance.
Before carrying out any cleaning
or maintenance on the dishwasher,
always remove the plug from the
electricity socket. Do not run risks.
No solvents!
No abrasives!
To clean the exterior and rubber
parts of your appliance, do not use
solvents or abrasive cleaning prod-
ucts. Use a cloth dampened with
lukewarm soapy water only.
If there are any stains on the sur-
face of the appliance interior, use
a cloth dampened with water and
a little white vinegar, or a cleaning
product specifically made for dish-
washers.
Going on holiday?
When you go away for an extended
period of time, we recommend you
do the following:
run a cycle with the dishwasher
empty
turn off the water inlet tap.
leave the appliance door ajar
This will help the seals last longer
and prevent unpleasant odours
from forming inside the appliance.
Moving the appliance.
Should the appliance have to be
moved, try to keep it in a vertical
position. If absolutely necessary, it
can be positioned on its back.
The seals.
One of the factors that cause un-
pleasant odours to form inside the
dishwasher is food that remains
trapped in the seals. Periodic clean-
ing using a damp sponge will pre-
vent this from occurring.
Your dishwasher is not a waste
disintegrator!
Do not worry about removing every
single bit of food residue from your
dishes, but do get rid of bones, peel and
rind and any other left-overs before
placing them in the racks. Empty out
all glasses and cups.
Cleaning the sprayer
arms.
Food residue may become en-
crusted onto the sprayer arms and
block the holes where water comes
out. Check the sprayer arms regu-
larly and clean them once in a while
(letters F and I in the How is it
made? chapter).
A
D
B
C
1
2
A
B
C
All manuals and user guides at all-guides.com