4
TECHNICAL CHARACTERISTICS
for the technical specifications, refer to the nameplate (the nameplate is located on the right side
of the water heater).
Product ınforMAtıon
Power
3.5kW
4kW
5kW
5.5kW
7kW
7.7kW
voltage
220-240 220-240 220-240 220-240 220-240 220-240
Phases
Mono
Mono
Mono
Mono
Mono
Mono
ınstallation
over sink
construction
open outlet
Model
refer to name plate
frequency
50/60hz 50/60hz 50/60hz 50/60hz 50/60hz 50/60hz
Ampere
15.9
18.2
22.7
25
31.8
35
Water Protection
ıP25
Pipe connection
1/2" BsP
Minimum Water Pressure 0.3 bar
0.2 bar
0.2 bar
0.2 bar
0.3 bar
0.3 bar
qelec (kwh)
2.119
2.224
load Profile
XXs
Xs
lwa (db)
15db
Ἠwh
40%
38%
rated volume (lt)
400cc
400cc
400cc
400cc
400cc
400cc
Weight
1,350 gr 1,350 gr 1,350 gr 1,350 gr 1,350 gr 1,350 gr
dimensions
183x290x108 mm
the power consumption data in the table and the other information given in the Product data
sheet (enclosure A to this manual) are defined in relation to eu directives 812/2013 and 814/2013.
the products without the label and the data sheet for water heaters and solar devices, stipulated
in regulation 812/2013, are not intended to be used in such assemblies.
Products equipped with a regulator knob have the thermostat positioned in the <ready to use
setting indicated in the data sheet (enclosure A), according to which the relevant energy class
has been declared by the manufacturer.
The product should be connected only to a supply with the relevant system
impedance no more than 0.237 ohm.
Restrictions to connection may be imposed by the supply authority on the use of
equipment in the actual relevant system impedance at the interface point on the
user's premise exceeds 0.237 ohm.
This appliance is conforming with the international electrical safety standards IEC
60335-1 and IEC 60335-2-35. When present, The CE marking of the appliances
attests its conformity to the following EC Directives, of which it satisfies the
essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-35, EN 60529, EN 62233, EN
50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 61000-3-11 and EN 61000-3-12.
- ERP Energy related Products: Eu812, Eu814, EN50193-1-2013
