Ariston 3319122, Assembly And Operation Instructions Manual

Page: 11 / 76

1 2 3 4 5 6 7 8
5A - 230V
230V
50Hz
L N
1 2 3 4 5 6 7 8
5A - 230V
230V
50Hz
230V Z1 Z2
L N
GB - 11
start-up
Warning!
Shut off power before working on the de-
vice.
ELECTRICAL CONNECTIONS
For greater safety, ask a qualified techni-
cian to perform a thorough check of the
electrical system.
The manufacturer shall not be responsi-
ble for any damage caused by the ab-
sence of a suitable earthing system or
by the malfunctioning of the electricity
mains supply. Ensure that the electrical
system can provide the maximum pow-
er required by the module (as indicated
on the data plate). Ensure that the wires
have a suitable cross-sectional area of at
least 1.5 mm
2 .
Proper connection to an efficient earthing
system is essential for ensuring safe op-
eration of the device.
The power supply cable must be con-
nected to a 230 V-50 Hz network, while
observing the L-N poles and ensuring
connection to earth.
H05 V2V2-F
Important!
The connection to the mains must be per-
manent (not using a plug) and equipped
with a bipolar switch with a contact air
gap of at least 3 mm when open.
- Open the cover by pressing lightly on
the tab at the bottom of the receiver
(Fig. 1).
- Connect the high voltage accesso-
ry (such as circulation pumps or zone
valves) to terminals 1 to 5
- Connect the device's power to the indi-
cated terminal (fig. 4)
- Close the cover
- Power the appliance up
Fig. 4
OUTPUTS ELECTRICAL POWER
SUPPLY 230V
EXAMPLE OF ZONE CONNECTION