If your watch has a day-date setting, set the weekday by turning
the winding crown in an anti-clockwise direction.
Now pull the winding crown out as far as it will go.
Turn the winding crown so that both hands turn in a clockwise
direction. The date will click over to the next day as you turn
through every 24 hours, then set the hands at the actual time of
day. Make sure the hands pass “12” twice if you set the time after
midday.
For setting the time to the second, the second hand stays in its positi-
on when the winding crown is entirely pulled out (“hack set”).
Push the crown in fully now to get your watch started.
Please note: The date calendar of the
chronograph
S
ETA
/V
aljoux 7750 automa
TICALLY
switches over to the next day between 10 p.m. and 2 a.m. During this period the
datecalendar should not be changed and the time should not be put back
(risk of damage).
1.3. Self-winding wristwatches with a screw crown
Some wristwatches are equipped with a screw crown. To wind the watch manually and set the date and exact
time, turn the winding crown anti-clockwise. After setting the time push the winding crown in again and
care-fully screw it in place. The watch is only waterproof if the crown is screwed back!
