Arista CloudVision DCA-CV-100, Quick Start Manual

Page: 27 / 46

Rack Installation
5. Removing the System From the Rack.
a. Locate the lock levers on the sides of the inner rails (1).
b. Unlock each lever by rotating it up to its release position (2).
c. Grasp the sides of the system firmly and pull it forward until the rail standoffs are at the front of
the J-slots. Lift the system up and away from the rack and place it on a level surface (3).
6. Engaging and Releasing the Slam Latch.
Note: For systems not equipped with slam latches, secure the system using screws, as
described in Step C of this procedure.
a. Facing the front, locate the slam latch on either side of the system (1).
b. The latches engage automatically as the system is pushed into the rack and are released by
pulling up on the latches (2).
c. To secure the system for shipment in the rack or for other unstable environments, locate the
hard-mount screw under each latch and tighten each screw with a #2 Phillips screwdriver (3).
23