2. Mounting C-250 on the bracket: Place the first mounting post on the rear-side of the AP on to the lower
notch of the bracket. Rotate the AP such that the center mounting post fits in to the center notch on the bracket.
Ensure that all the mounting posts on the rear-side of the AP are snapped in to the respective notches on the
bracket. The mounting posts now properly fit in the respective notches of the bracket and the AP is mounted
properly.
Mounting Instructions using the Silhouette/Interlude Bracket Mount: The Silhouette/Interlude mounting
bracket is not a part of the standard package and must be procured separately. The mounting instructions for
the Silhouette/Interlude Bracket Mount are similar to the Standard Package Content's mounting instructions.
Note: You should label the APs using MAC addresses or your own convention. For example, use
serial numbers, so that you can easily identify the APs.
Wall Mount the Access Point
Note: The wall mounting accessory SKU can be ordered and purchased separately.
Mounting the access point (AP) on a wall consists of the following steps:
11
