C-230 | 3 - Access Point Overview | 5
Table 3. Power LED States Description
Green
Orange
Solid
Running at full capability
Running at reduced capability
Blinking
Received IP address, but not connected to the
server
Did not receive an IP address
Reduced capability indicates that the AP is getting lower than the required maximum power from the
PoE switch, i.e., 802.3af instead of 802.3at.
LAN1 LED: ON when the corresponding interface is up.
LAN2 LED: ON when the corresponding interface is up and either wired guest or link aggregation is
configured.
Radio LEDs: ON when the corresponding radio is operational.
Rear Panel
The rear panel of the AP has its DC power port and 802.3at compliant PoE LAN ports to power the
device and connect it to a wired LAN.
Figure 3. Rear Panel
Table 4. Labels: Rear Panel
Label
Description
1
LAN2
2
LAN1
3
Power
Table 5. C-230 Port Details
Port
Description
Connector Type
Speed/Protocol
Power12V DC
5.5 mm overall diameter / 2.1 mm
center pinhole
N/A
