C-230 | 4 - Install the Access Point | 9
parallel to an arm of the T-grid. Ensure that the bracket is properly snapped to the T-grid, as
shown below.
2. Mounting the AP on the bracket: Place the first mounting post on the rear-side of the AP on
to the lower notch of the bracket. Rotate the AP such that the center mounting post fits in to the
center notch on the bracket. Ensure that all the mounting posts on the rear-side of the AP are
snapped in to the respective notches on the bracket. The mounting posts now properly fit in the
respective notches of the bracket and the AP is mounted properly.
Mounting Instructions using the Silhouette/Interlude Bracket Mount: The Silhouette/
Interlude mounting bracket is not a part of the standard package and must be procured
separately. The mounting instructions for the Silhouette/Interlude Bracket Mount are similar to
the Standard Package Content's mounting instructions.
Note: You should label the APs using MAC addresses or your own convention. For
example, use serial numbers, so that you can easily identify the APs.
