Connect the management ports as follows:
•
Console (Serial) Port: Connect to a PC with the RJ-45 to DB-9 serial adapter cable. The
switch
uses the following default settings:
•
9600 baud
•
No flow control
•
1 stop bit
•
No parity bits
•
8 data bits
•
Ethernet Management Port: Connect to 10/100/1000 management network with RJ-45
Ethernet
cable.
•
USB Port: The USB port may be used for software or configuration updates.
CAUTION:
Excessive bending can damage interface cables, especially optical cables.
Flexion excessive peut endommager les câbles d’interface, notamment des câbles optiques.
24