2. Attach the brackets with two M4x5 flat head Philips screws as shown in the following figure.
Figure 4: Attaching Mounting Brackets
3.1.2
Inserting the Switch into the Rack
This procedure attaches the switch to the rack.
1. Lift the chassis into the rack. Position the flanges against the rack posts.
2. Select mounting screws that fit your equipment rack.
3. Attach the bracket flanges to the rack posts.
Figure 5: Inserting Switch into the Rack
After completing the rack mount, proceed to
.
3.2
Flat Surface Placement
The switch is prepared for flat surface placement by attaching four rubber pads on the bottom of the
chassis to prevent the switch from sliding on the table and to protect the surface of the table.
The installation kit provides the following flat surface placement parts.
•
Four rubber switch pads
10
